Rheem Eclipse Continuous Flow Electric Water Heater is designed for residential apartments and commercial buildings with fast temperature delivery. All models come with adjustable temperature display to control the exact temperature at the tap with 3 phase connections to ensure customers’ needs saving time and water.
Features at a Glance
- Fast delivery of your desired temperature
- Three memory modes for quick access to pre-set child safe or bath temperatures with touch screen display
- Available in 50°C and 60°C max. output temperatures to suit site requirements.
- Low activation flow rate to suit low flow tapware and high ambient temperatures
- Flexible installation options with inlet and outlet fittings and electrical connection concealed through the wall or from the bottom of the water heater
- Automatic sleep mode for energy savings
Watch the video for more details- https://youtu.be/MLpWtEwLCkg
Owners and Installation Guides
The water heater(s) shall be Rheem Eclipse Continuous Flow Electric Water Heater model no. 6C327600A (60 Deg. Model) or 6C327500A (50 Deg. Model) with input of 27kW at 380 - 415V, AC 3 Phase 3 wire and earth, 50Hz connection. The water heater(s) shall conform to Australian Standard AS/NZS60335.2.35, AS3498 and Electromagnetic compatibility (EMC) Australian Standard AS/NZS 61000.6.3. The water heaters shall be factory assembled and tested. The water heater(s) shall have certain trade adjustability functions for installers to adjust maximum temperature set points. The water heater(s) shall have touch screen user interface and auto sleep mode. The water heater(s) shall have sustainable packaging materials with no EPS packaging.
Running Cost Estimator
Select your State
Running Cost Estimator Disclaimer as at 01/10/2023
Things that you should know about the Rheem Running Cost Estimator
The estimator is provided as a guide only to help you compare estimated running costs between various water heater types.
The estimator is based on Australian Standard AS5263, which relies on certain assumptions, such as an average daily load of 200L and 19 tap turns. Your situation and usage may be different to these assumptions, so the estimator may not match your actual daily loads and pattern of use.
Accordingly, the estimator cannot and does not purport to provide an accurate assessment of your yearly hot water energy bill. It does, however, allow a reasonable comparison between various water heater types based on Australian Standard AS5263 and average fuel tariffs used in the estimator.
Your state has been used to determine the temperature rise required to heat water from cold to a temperature of 65C, the applicable charge for the tariff type selected and the amount of solar savings.
Solar savings are based on Australian Government approved modelling for the type of solar water heater selected and the booster type. All electric boosted solar water heaters are modelled with a continuous tariff, but may be suitable for use on other tariff types depending on the model selected, your climate zone and the amount and usage pattern of hot water use.
Tariffs are current as at 9th March 2023 and represent an average price for the fuel type for the capital city in the state or territory, including GST.
Fixed charges, system access charges, delivery fees and any other fees and charges, including special rates and discounts are excluded from the estimator.
Energy consumption figures used are for a typical water heater within a category and do not reflect a specific model. Actual energy use may vary.
Heat Pump and solar water heaters may be suitable for Off Peak/Shoulder Rate tariffs depending on the type of water heater selected and the location. You should consult with your energy provider or installer before making any decision.
Desired max. hot water temperature
Number of showers Note: *9L/min showers
Do you have a bath ?
Number of kitchen sinks