text.skipToContent text.skipToNavigation
install a
Rheem

MODEL NO: RTHP067-250 kW
Wave Series - Commercial Pool Inverter Heat Pumps

The Rheem Wave Series is an Australian-made commercial pool inverter heat pump range designed for efficient, intelligent pool heating and cooling. Available in five models from approximately 67 kW to 250 kW heating capacity, the Wave Series uses inverter compressor and fan technology together with Rheem IQ® controls to optimise energy use, operating performance and pool temperature management.

Features at a Glance

Capacity
67kW to 250kW

Features

  • INVERTER TECHNOLOGY: Maximises efficiency and energy savings with EEV3
  • RAPID BOOST MODE: Maximum power on demand
  • NIGHT MODE: Reduces noise and running costs
  • RHEEM IQ: Smart Heating and Smarter Savings
  • HEATING OR COOLING: Automatically maintains the perfect temperature
  • TOP OR SIDE DISCHARGE: Installation flexibility

Warranty

  • 25 Year Heat Exchanger, 5 Year Parts and 1 Year Labour

The commercial pool heat pump shall be Rheem Wave Series, available in models RTHP067YT, RTHP098YT, RTHP133YT, RTHP203YT and RTHP250YT.

At air 27°C / water 26°C / 80% relative humidity, nominal Heating Mode capacities shall be 66.8 kW, 97.2 kW, 132.6 kW, 203.3 kW and 247.4 kW respectively. Beast Mode heating capacities shall be 77.9 kW, 116.7 kW, 160.1 kW, 239.3 kW and 288.0 kW respectively.

The units shall operate from a 380–415 V three-phase electrical supply and shall incorporate inverter scroll compressors, R32 refrigerant and reverse-cycle defrost. Maximum water outlet temperature shall be 42°C.

The heat exchanger shall be titanium. Nominal water flow rates shall be 5.0 L/s, 7.5 L/s, 10.0 L/s, 15.0 L/s and 18.0 L/s respectively.

Models RTHP067YT and RTHP098YT shall be available in top- or side-discharge configurations, while RTHP133YT, RTHP203YT and RTHP250YT shall use top discharge. The system shall incorporate Rheem IQ® intelligent controls, Night Mode, heating and cooling operation, and provision for Building Management System integration using BACnet or Modbus where required.