text.skipToContent text.skipToNavigation
install a
Rheem
RHEEM TPAK INT 01 NAT WALL MNT 1 X 430
MODEL NO: TPI01-1430
Tankpak Internal TPI01 - 430
Rheem Tankpak Series 2 is the next phase in commercial water heating, combining the benefits of mains pressure and continuous flow water heating. Rheem Tankpak models with 1xCFWH are supplied with the tank, controller, pump, mounting bracket and water heater power supply.
REQUEST A QUOTE
Product Details

Features at a Glance

Capacity
1x430
Energy Rating
6 Star
Warranty
5 Years

Features

  • 84% thermal efficiency 6 Star heat source
  • Vitreous enamel storage tank up to 82°C operation
  • Large flow 50mm storage tank fittings
  • Digital temperature display
  • Fully hot dip galvanised frame with Tankpak 2-18

 

Brochures, Guides & Drawings

Brochures

Tankpak Single Unit- TP01 Specification Sheet- Oct 2020 201026
Continuous Flow Flue Systems Pages from C&I Brochure_DIGITAL 2022
Continuous Flow HW Pages from C&I Brochure_DIGITAL 2022

Owners and Installation Guides

install instruct - Rheem CFGWH 862 627 series indoor - 122180 Rev J - 2020 November
install-instruct-Tankpak-1-water-heater-mounting-kit-for-storage-tanks-122136-Rev-A-Nov-2020

Drawings

AQ00003021-A Install Diag Tankpak S2-Revised with Guardian Warm Water.dwg
AQ00003021-A Install Diag Tankpak S2-Revised with Guardian Warm Water.pdf
AQ00003022-A Install Diag Tankpak S2-Revised Single Tank.dwg
AQ00003022-A Install Diag Tankpak S2-Revised Single Tank.pdf
AQ00003023-A Install Diag Tankpak S2-Revised Multiple Tanks.dwg
AQ00003023-A Install Diag Tankpak S2-Revised Multiple Tanks.pdf
Heating_Rheem_Tankpak_Series3_Internal_Standard_TPI01.rfa
Specification

The water heater(s) shall be Rheem Tankpak Series 2 model no. __ with an hourly input of __ MJ and a hourly recovery rate of ___ litres through 50°C rise. The water heater(s) shall conform to AS4552. The water heater shall operate on the top down heating principle. The water heaters shall be factory assembled and tested and include thermostatic control, double redundancy timers and double redundancy pump relays housed in an IP44 enclosure. Deluxe models shall incorporate general purpose outlets for continuous flow water heater power housed in a water proof enclosure, and cold water inlet line strainer. The frame shall be hot dip galvanised and third party certified for wind loadings up to 74.87m/sec. Models shall be suitable for wall, floor or back to back mounting, model dependent. Storage tanks shall be Rheem model no. 610340 with a storage capacity of 325 litres or 610430 with a storage capacity of 410 litres with heavy duty enamelling and 25mm sacrificial anode and shall be fitted with 50mm BSP connections. 
Performance Calculator