Rheem Tankpak® 1 Internal is a single-unit commercial hot water system combining one internal continuous flow water heater with a storage tank, pump and controller. Designed for flexible indoor installation, the continuous flow water heater can be mounted on the tank or on a wall, with flueing options to suit site requirements.
Features at a Glance
Capacity
Energy Rating
Warranty*
Features
- 84% thermal efficiency 6 Star heat source
- Vitreous enamel storage tank up to 82°C operation
- Large flow 50mm storage tank fittings
- Digital temperature display
- Fully hot dip galvanised frame with Tankpak 2-18
Owners and Installation Guides
Drawings
The water heating system shall be Rheem Tankpak® 1 Internal model TPI01, comprising one Rheem internal commercial continuous flow water heater, one commercial storage tank, primary circulating pump and system controller.
The system shall have a thermal input of 210 MJ/h and a nominal recovery rate of 843 litres per hour through a 50°C temperature rise.
The internal continuous flow water heater shall be Rheem model 862627F or 862B28F, as applicable. The system shall be supplied with a Rheem UPS32-80N primary circulating pump and PUMPC IV2 controller.
Storage shall be selected to suit the application, including Rheem 325 litre or 410 litre commercial storage tank options. Tankpak® 1 Internal shall be suitable for wall mounting of the continuous flow water heater, with an optional tank mounting bracket arrangement available where required.
The system shall be capable of delivering stored hot water up to 82°C. Recommended operating settings shall be 70°C for the continuous flow water heater, 65°C for the controller and pump speed 3.
Number of Units
Temperature Rise
