text.skipToContent text.skipToNavigation
install a
Rheem

MODEL NO: 624275
Rheem Heavy Duty Gas 275L - Indoor
Rheem Heavy Duty Gas water heaters have been designed to supply large quantities of hot water. The cylinder is protected by multiple anodes and a double layer of vitreous enamel.

Features at a Glance

Capacity
275
Warranty
5 Years
Features
  • Multi-Fin™ technology means faster, more efficient heating
  • Flue damper improves heat retention
  • Digital adjustable thermostat to 82°C for sanitisation applications
  • Electronic Ignition for economy
  • Equa-Flow® system allows for flexibility in installation
  • Built in BMS
Warranty
  • 5 year Commercial warranty on cylinder*
  • 12 month warranty on parts and labour*

*Warranty conditions apply

The water heater(s) shall be Rheem heavy duty gas model no. 624275 with an hourly gas input of 200 MJ (Natural & SNG), 190 MJ (Propane), 160 MJ (Butane), and a hourly recovery rate of 765 (Natural & SNG), 725 (Propane), 610 (Butane) litres through 50°C rise. The water heater(s) shall conform to Australian and New Zealand Standard 4552 or 5263. The water heater shall be factory assembled and tested. Gas controls shall incorporate over temperature energy cut off switch and a 100% safety shut down failure control in the event of the thermostat becoming inoperative. The storage cylinder shall be insulated using CFC free polyurethane foam. The design of the storage cylinder shall incorporate Multi-Fin flue technology with an automatic flue damper for increased thermal efficiency. The water heater shall incorporate hot surface ignition and digital thermostats.