The AmbiPower 5kW Split system is a powerful Ultra Low GWP water circulated split heat pump paired with Vitreous Enamel or Stainless Steel tanks.
Features at a Glance
Capacity
No. of People ✕
Warranty*
-
325 litre stainless steel water tank suitable for good water conditions. Also available in 315 litre vitreous enamel-lined tank.
-
Split heat exchanger unit designed to be mounted on the ground or on the wall to minimise space requirements. The tank can be installed up to 5 metres away or indoors (eg, inside a garage) and is a water circulation system. The heat pump module is mountable up to 2 metres high on walls, making it ideal for narrow spaces.
-
Touchscreen controller provides optimum visibility, product performance information, and user-friendly operation
-
4.6kW heating capacity
-
Suitable for cold climates with an operating range from -7oC to +43oC
-
Uses R290 Ultra Low refrigerant - GWP of 0.02
-
Suitable for up to 6 people^
-
Can save up to 78% on your water heating energy consumption compared to an electric water heater in Zone 3#
-
Eligible for STCs (may be eligible for additional incentives in some states)
-
User-friendly touch screen LED display
- 10 years cylinder supply
- 3 years cylinder labour
- 3 years sealed systems supply including labour
- 1 year parts supply and labour on all other parts
Specifications
Owners and Installation Guides
Specifications
Running Cost Estimator
Select your State
Running Cost Estimator Disclaimer as at 01/10/2023
Things that you should know about the Rheem Running Cost Estimator
The estimator is provided as a guide only to help you compare estimated running costs between various water heater types.
The estimator is based on Australian Standard AS5263, which relies on certain assumptions, such as an average daily load of 200L and 19 tap turns. Your situation and usage may be different to these assumptions, so the estimator may not match your actual daily loads and pattern of use.
Accordingly, the estimator cannot and does not purport to provide an accurate assessment of your yearly hot water energy bill. It does, however, allow a reasonable comparison between various water heater types based on Australian Standard AS5263 and average fuel tariffs used in the estimator.
Your state has been used to determine the temperature rise required to heat water from cold to a temperature of 65C, the applicable charge for the tariff type selected and the amount of solar savings.
Solar savings are based on Australian Government approved modelling for the type of solar water heater selected and the booster type. All electric boosted solar water heaters are modelled with a continuous tariff, but may be suitable for use on other tariff types depending on the model selected, your climate zone and the amount and usage pattern of hot water use.
Tariffs are current as at 9th March 2023 and represent an average price for the fuel type for the capital city in the state or territory, including GST.
Fixed charges, system access charges, delivery fees and any other fees and charges, including special rates and discounts are excluded from the estimator.
Energy consumption figures used are for a typical water heater within a category and do not reflect a specific model. Actual energy use may vary.
Heat Pump and solar water heaters may be suitable for Off Peak/Shoulder Rate tariffs depending on the type of water heater selected and the location. You should consult with your energy provider or installer before making any decision.
