text.skipToContent text.skipToNavigation
install a

Tankpak Series 3 External Deluxe TP3E02-18D

Rheem Tankpak Series 3 is the next phase in commercial water heating with electronic staging and rotation, for increased efficiency and product life. Combining the benefits of mains pressure and continuous flow water heating, Rheem Tankpak Series 3 deluxe models are supplied with the master controller, optional duty/standby primary pumps, optional duty/standby secondary pumps customised for each site requirement, in line filter, BMS and remote monitoring capabilities and multiple sensors with digital display for total system diagnostics. Models up to TP04 are supplied with 10A plug and lead. Models over TP04 require hard wiring by qualified person on site.

Features at a Glance

5 Years


  • Electronic staging and rotation with intelligent controller
  • BMS and remote monitoring capabilities
  • Duty/standby primary and/or secondary pumps options
  • System diagnostics with multiple sensors
  • Shorter and lighter frame design
  • Inline, wall mount or back to back mounting options
  • Reduced installation costs
  • 84% thermal efficiency 6 Star heat source
  • Vitreous enamel storage tank with 50mm fittings up to 82°C operation

Warranty Conditions

5 years warranty on cylinder and heat exchanger, 1 year on parts and labour. 12 months warranty on Heat Exchanger when used with a thermostat setting exceeding 75°C

The water heater(s) shall be Rheem Tankpak Series 3 Deluxe model no. __ with an hourly input of __ MJ and an hourly recovery rate of ___ litres through 50°C rise. The water heater(s) shall conform to AS/NZS5263.1.2. The water heater shall operate on the top down heating principle. The water heater shall have electronic staging and rotation for models with more than two continuous flow units to reduce energy consumption. The water heater shall have high level BMS and remote monitoring capabilities. [for duty/standby primary pump option] The water heater shall be provided with two primary pumps operating in duty/standby and auto changeover if pump is in fault. [for duty/standby secondary pump option] The water heater shall be provided with factory integrated duty/standby UPM series secondary pumps with auto changeover if pump is in fault. The water heater shall be supplied with 3 temperature sensors to monitor tank, building flow and building return and if secondary pumps are integrated, control the pumps via the return sensor to reduce energy consumption. The water heaters shall be factory assembled and tested and include master controller with digital display housed in an IP54 enclosure. The frame shall be hot dip galvanised and third party certified for wind loadings up to 74.87m/sec. Models shall be suitable for wall, floor or back to back mounting, model dependent. Indoor models shall be supplied with factory integrated condensate drains and traps. Storage tanks shall be Rheem model no. 61034050 with a storage capacity of 325 litres or 61043050 with a storage capacity of 410 litres with heavy duty enamelling and 25mm sacrificial anode and shall be fitted with 50mm BSP connections.