text.skipToContent text.skipToNavigation
install a
Rheem

MODEL NO: HP551310
Rheem HDi-310 Heat Pump
A heat pump works day and night as it extracts heat from the surrounding air and doesn’t rely on direct sunlight to operate. The HDi-310 Heat Pump provides relatively speedy recovery and utilises an advanced Top Down Heating design which delivers a concentrated volume of hot water at the top of the tank and available for immediate use. This eliminates the waiting time for the entire tank to reheat. It has frost protection and includes a back-up element as standard, delivering 60ºC hot water, even on the coldest winter nights

Features at a Glance

Capacity
310L
No. of People
6
Warranty
5 years
Features
  • 310L Tank capacity is suitable for 3-6 people
  • "Top Down" single pass heating ensures hot water is readily available
  • Back up electric element ensures hot water on the coldest of winter nights
  • Cuts energy use1,2
Warranty
  • 5 years cylinder supply*
  • 3 years cylinder labour*
  •  2 years sealed systems supply and labour
  • 1 year parts supply and labour
*Applies to an installation in a single-family domestic dwelling only.
Amended warranty may apply where a government rebate (Victoria) has been received for the solar and heat pump water heater. Phone 131 031 for details.
1Energy and greenhouse gas emissions reduction based on Australian Govt Approved TRNSYS simulation modelling and apply when replacing an electric water heater with a Rheem Heat Pump water heater.
2The impact on an electricity account will depend on the tariff arrangement of the water heater being replaced and where you live. These Rheem Heat Pump water heaters (model dependant) are recommended for connection to either 24 hour continuous tariff or extended off peak (min 16 hours/day). Before purchase consult your energy provider for more information on cost comparisons
Warranty conditions apply.
 

Running Cost Estimator

Running Cost Estimator Disclaimer as at 23/10/2017

Things that you should know about the Rheem Running Cost Estimator

The estimator is provided as a guide only to help you compare estimated running costs between various water heater types.

The estimator is based on Australian Standard AS5263, which relies on certain assumptions, such as an average daily load of 200L and 19 tap turns. Your situation and usage may be different to these assumptions, so the estimator may not match your actual daily loads and pattern of use.

Accordingly, the estimator cannot and does not purport to provide an accurate assessment of your yearly hot water energy bill. It does, however, allow a reasonable comparison between various water heater types based on Australian Standard AS5263 and average fuel tariffs used in the estimator.

Your state has been used to determine the temperature rise required to heat water from cold to a temperature of 65C, the applicable charge for the tariff type selected and the amount of solar savings.

Solar savings are based on Australian Government approved modelling for the type of solar water heater selected and the booster type. All electric boosted solar water heaters are modelled with a continuous tariff, but may be suitable for use on other tariff types depending on the model selected, your climate zone and the amount and usage pattern of hot water use.

Tariffs are current as at 1st July 2017 and represent an average price for the fuel type for the capital city in the state or territory, including GST.

Fixed charges, system access charges, delivery fees and any other fees and charges, including special rates and discounts are excluded from the estimator.

Energy consumption figures used are for a typical water heater within a category and do not reflect a specific model. Actual energy use may vary.

Heat Pump and solar water heaters may be suitable for Off Peak/Shoulder Rate tariffs depending on the type of water heater selected and the location. You should consult with your energy provider or installer before making any decision.