text.skipToContent text.skipToNavigation
install a
Rheem

MODEL NO: 4A2250
Rheem Stellar® 250L Stainless Steel Twin Element Electric Water Heater
The perfect electric water heater for small to medium-sized families with a big demand for hot water.

Features at a Glance

Capacity
250
No. of People
˟Up to 8
Warranty
12 years
Features:
  • Twin element model (4A2250)
  • Dual handed cold water connections, a hot water connection at the top of the water heater.
  • Stainless steel cylinder and water fittings
  • No anode — saves on maintenance and service costs
  • Money saving — designed for off-peak energy rates.
  • Made in Australia
Rheem Stellar Stainless Steel water heaters are not recommended for installation in some areas. Refer to the Stainless Steel Suitability Map for your state to see if Stainless Steel is suitable for your home.
 
Warranty:
  • 12 years cylinder warranty*
  • 3 years labour on cylinder*
  • 1 year parts and labour warranty*
*Warranty conditions apply.
˟ Calculations based on 7 min showers at 42°C mixed water temperature in moderate climate, time of use tariff.

Specifications

Running Cost Estimator

Running Cost Estimator Disclaimer as at 01/10/2023

Things that you should know about the Rheem Running Cost Estimator

The estimator is provided as a guide only to help you compare estimated running costs between various water heater types.

The estimator is based on Australian Standard AS5263, which relies on certain assumptions, such as an average daily load of 200L and 19 tap turns. Your situation and usage may be different to these assumptions, so the estimator may not match your actual daily loads and pattern of use.

Accordingly, the estimator cannot and does not purport to provide an accurate assessment of your yearly hot water energy bill. It does, however, allow a reasonable comparison between various water heater types based on Australian Standard AS5263 and average fuel tariffs used in the estimator.

Your state has been used to determine the temperature rise required to heat water from cold to a temperature of 65C, the applicable charge for the tariff type selected and the amount of solar savings.

Solar savings are based on Australian Government approved modelling for the type of solar water heater selected and the booster type. All electric boosted solar water heaters are modelled with a continuous tariff, but may be suitable for use on other tariff types depending on the model selected, your climate zone and the amount and usage pattern of hot water use.

Tariffs are current as at 9th March 2023 and represent an average price for the fuel type for the capital city in the state or territory, including GST.

Fixed charges, system access charges, delivery fees and any other fees and charges, including special rates and discounts are excluded from the estimator.

Energy consumption figures used are for a typical water heater within a category and do not reflect a specific model. Actual energy use may vary.

Heat Pump and solar water heaters may be suitable for Off Peak/Shoulder Rate tariffs depending on the type of water heater selected and the location. You should consult with your energy provider or installer before making any decision.