MODEL NO: 052310

Rheem EZiSET® kit

3

YEAR
WTY

With the NEW Rheem EZiSET® app, controlling your hot water has never been easier.

Features at a Glance

Capacity (L)
0
No. of People
0
Energy Rating
n/a

To install a Rheem, you'll need a plumber

Get in touch with your local Rheem Approved Plumber and ensure your install is done right.

  • Set your ideal bath temperature and water level
  • Uses the security and superior signal strength of your home WiFi and powerline network
  • Ask your plumber to install your Rheem EZiSET®
  • Once installed, simply download the Rheem EZiSET® app and you’re in full control – it’s that easy
  • 3 year warranty on parts and labour

To obtain a quote on this product

Call Rheem on


Ready to buy a Rheem?

For help to make the right choice, access our network of Rheem Approved Plumbers and Stockists.


Top Five Troubleshooting Topics


Please contact your electricity provider to confirm the times when you pay off-peak, shoulder and peak tariffs for your electricity. Your water heater will be connected to an appropriate tariff (timed control), depending on its capacity, to ensure you have sufficient hot water for your needs. Twin element water heater models have the added benefit of using off peak tariffs to save money whilst providing an extra boost should it be needed. Please see the Owner Guide for your Storage Water Heater model.

Please see the Owner Guide for your heater model.

For showers to operate correctly, it’s necessary to store your hot water at a minimum of 60°C. 

 

If your water heater is fitted with a temperature limiting valve and the water is hotter than it should be, please call Rheem on 1300 556 036.  

 

If your hot water is hotter than it should be and you don’t have a temperature limiting valve installed, then you could:

  • Have the thermostat on your water heater adjusted downward (with a gas storage water heater you can do this yourself). Please note that gas storage must be set no lower than 60°C and a gas continuous flow booster for a solar system must be set no lower than 70°C

     
  • Ask your plumber to install a 50°C temperature limiting valve

 

To find your local Rheem Plumber, contact us  or call Rheem on 1300 556 036.  

The water temperature may be lower than usual due to heavy hot water usage. Also, this problem could be due to faulty tempering valve that is excessively cooling your hot water. Your local approved Plumber can test your system and replace the valve if necessary. To find your local Rheem Plumber, contact us  or call Rheem on 1300 556 036.  

Do you have a solar water heater? Check that the booster is being used as per the installation instructions for your model. If you have a timer installed, you will need to ensure that sufficient time is allowed to heat enough water to meet your household’s hot water needs

If you have a 50°C temperature limited water heater, then hot water to your whole house will be limited to 50°C

The error code is displayed in the room temperature display. Please refer to the below listing to see what your error codes means, then call Rheem Service to book a service call on 13 10 31.

 

Error Code

Fault Condition

Action

03

Filter damage

 

 

 

 

 

 

BOOK SERVICE CALL WITH RHEEM SERVICE

PH: 13 10 31

05

Filter not cleared

11

Ignition Failure

12

Flame Failure

14

Thermo Switch Off (150⁰C)

Overheat Thermistor temp. too high

16

Room temp. too high

(40⁰C  10 min)

22

Tip-Over switch operate

31

Room temp. thermistor abnormal

33

Overheat thermistor abnormal

62

Abnormal fan speed

71

Gas solenoid valves circuit abnormal

Gas proportional control valve circuit abnormal

72

Detected false flame

Thermocouple circuit abnormal

73

Functional trouble on gas type circuit

 

 

H: High

L: Low

SW: Switch


Is the gas connection only used for the Water Heater?

Please, select all the fields

Running Cost Estimator Disclaimer as at 23/10/2017

Things that you should know about the Rheem Running Cost Estimator

The estimator is provided as a guide only to help you compare estimated running costs between various water heater types.

The estimator is based on Australian Standard AS5263, which relies on certain assumptions, such as an average daily load of 200L and 19 tap turns. Your situation and usage may be different to these assumptions, so the estimator may not match your actual daily loads and pattern of use.

Accordingly, the estimator cannot and does not purport to provide an accurate assessment of your yearly hot water energy bill. It does, however, allow a reasonable comparison between various water heater types based on Australian Standard AS5263 and average fuel tariffs used in the estimator.

Your state has been used to determine the temperature rise required to heat water from cold to a temperature of 65C, the applicable charge for the tariff type selected and the amount of solar savings.

Solar savings are based on Australian Government approved modelling for the type of solar water heater selected and the booster type. All electric boosted solar water heaters are modelled with a continuous tariff, but may be suitable for use on other tariff types depending on the model selected, your climate zone and the amount and usage pattern of hot water use.

Tariffs are current as at 1st July 2017 and represent an average price for the fuel type for the capital city in the state or territory, including GST.

Fixed charges, system access charges, delivery fees and any other fees and charges, including special rates and discounts are excluded from the estimator.

Energy consumption figures used are for a typical water heater within a category and do not reflect a specific model. Actual energy use may vary.

Heat Pump and solar water heaters may be suitable for Off Peak/Shoulder Rate tariffs depending on the type of water heater selected and the location. You should consult with your energy provider or installer before making any decision.

Rheem EziSet Flyer 2-sided no bleed

Specification sheet


Recess Boxes

To help protect the water heater and set your Rheem into the wall.

Rheem Standard Flue Diverter

Offers flexibility in installation, while enabling compliance with relevant national and local regulations.

Save when switching to solar


To install a Rheem, you'll need a plumber

Get in touch with your local Rheem Approved Plumber and ensure your install is done right.


Ready to buy a Rheem?

For help to make the right choice, access our network of Rheem Approved Plumbers and Stockists.