MODEL NO: 4A1080

Rheem Stellar® 80L Stainless Steel Electric Water Heater

12

YEAR
WTY

Hot water for small spaces. The Rheem Stellar® 80L is perfect for tight spots where there's limited demand for hot water such as one bedroom apartments, kitchens and canteens.

Rheem Stellar® Stainless Steel water heaters are not recommended for installation in some areas. To find out if Stellar Stainless Steel is suitable for your home download this Stainless Steel Suitability Map.![STELLARSSPRODUCTSMAPSJan2018]

Features at a Glance

Capacity (L)
90
No. of People
1-2  continuous
Energy Rating
n/a

To install a Rheem, you'll need a plumber

Get in touch with your local Rheem Approved Plumber and ensure your install is done right.

  • Features dual handed cold water connections, a hot water connection at the top of the water heater.
  • Stainless steel cylinder and water fittings
  • Compact.
  • No anode — saves on maintenance and service costs
  • Mains pressure — so you can run the tap and the dishwasher at the same time.
  • Made in Australia

Rheem Stellar Stainless Steel water heaters are not recommended for installation in some areas. Refer to the Stainless Steel Suitability Map for your state in the Downloads tab below to see if Stainless Steel is suitable for your home.

  • 12 years cylinder warranty*
  • 3 years labour on cylinder*
  • 1 year parts and labour warranty*

*Warranty conditions apply.

To obtain a quote on this product

Call Rheem on


Ready to buy a Rheem?

For help to make the right choice, access our network of Rheem Approved Plumbers and Stockists.


Top Five Troubleshooting Topics


Your local Rheem Plumber will pinpoint your ideal hot water system. They can supply Rheem products for a very competitive price and install them for you too. Another way to find the right hot water system for your home is to use our handy Help Me Decide tool

Please see the Owner Guide for your Storage Water Heater model and our gas relighting videos. 

Check out our Troubleshooting Guide for answers to some of the most common troubleshooting questions.

For showers to operate correctly, it’s necessary to store your hot water at a minimum of 60°C. 

 

If your water heater is fitted with a temperature limiting valve and the water is hotter than it should be, please call Rheem on 1300 556 036.  

 

If your hot water is hotter than it should be and you don’t have a temperature limiting valve installed, then you could:

  • Have the thermostat on your water heater adjusted downward (with a gas storage water heater you can do this yourself). Please note that gas storage must be set no lower than 60°C and a gas continuous flow booster for a solar system must be set no lower than 70°C

     
  • Ask your plumber to install a 50°C temperature limiting valve

 

To find your local Rheem Plumber, contact us  or call Rheem on 1300 556 036.  

Lowering the temperatures of your stored hot water will result in a greater level of hot water consumption. Therefore, it is unlikely to significantly reduce your gas or electricity consumption. Also, in order to meet the requirements of the Plumbing Code and for showers to operate correctly, it’s necessary to store your hot water at a minimum of 60օC.


Is the gas connection only used for the Water Heater?

Please, select all the fields

Running Cost Estimator Disclaimer as at 23/10/2017

Things that you should know about the Rheem Running Cost Estimator

The estimator is provided as a guide only to help you compare estimated running costs between various water heater types.

The estimator is based on Australian Standard AS5263, which relies on certain assumptions, such as an average daily load of 200L and 19 tap turns. Your situation and usage may be different to these assumptions, so the estimator may not match your actual daily loads and pattern of use.

Accordingly, the estimator cannot and does not purport to provide an accurate assessment of your yearly hot water energy bill. It does, however, allow a reasonable comparison between various water heater types based on Australian Standard AS5263 and average fuel tariffs used in the estimator.

Your state has been used to determine the temperature rise required to heat water from cold to a temperature of 65C, the applicable charge for the tariff type selected and the amount of solar savings.

Solar savings are based on Australian Government approved modelling for the type of solar water heater selected and the booster type. All electric boosted solar water heaters are modelled with a continuous tariff, but may be suitable for use on other tariff types depending on the model selected, your climate zone and the amount and usage pattern of hot water use.

Tariffs are current as at 1st July 2017 and represent an average price for the fuel type for the capital city in the state or territory, including GST.

Fixed charges, system access charges, delivery fees and any other fees and charges, including special rates and discounts are excluded from the estimator.

Energy consumption figures used are for a typical water heater within a category and do not reflect a specific model. Actual energy use may vary.

Heat Pump and solar water heaters may be suitable for Off Peak/Shoulder Rate tariffs depending on the type of water heater selected and the location. You should consult with your energy provider or installer before making any decision.

Rheem MKT Spec Sheet Electric SS Stellar May 2018


Rheem Stellar® 125L Stainless Steel Electric Water Heater

Providing reductions in energy usage, the perfect Rheem electric water heater for smaller families looking to save money.

Rheem Stellar® 50L Stainless Steel Electric Water Heater

Inexpensive to own and economical to run.

Save when switching to solar


To install a Rheem, you'll need a plumber

Get in touch with your local Rheem Approved Plumber and ensure your install is done right.


Ready to buy a Rheem?

For help to make the right choice, access our network of Rheem Approved Plumbers and Stockists.