Rheem Commercial Continuous Flow Gas Water Heaters - Commpak Internal - CPI04

Commpak - Internal - CPI04 - Commpak - Rheem

Commpak - Internal - CPI04 image
Thermal Input (MJ/h)Recovery at 50°C rise (L)Flow Rate at 50°C rise (L/min)LocationWarranty
820317053Indoor5 years

Rheem Commpak® offers the latest technology and is pre engineered for small to medium sized projects. With a maximum input of 820MJ/hr the system delivers mains pressure performance without the need for storage tanks.

  • Mains pressure performance
  • High efficiency continuous flow
  • Pre-engineered and assembled for ease of installation
  • Suitable for use in dead leg and recirculation systems.
  • BMS/BAS controller interface
  • 5 Year Commercial Warranty1

1Warranty Conditions, 5 Years Parts warranty on Heat Exchanger with a thermostat setting not exceeding 75°C, 12 months parts and labour. 12 months warranty on Heat Exchanger when used with a thermostat setting exceeding 75°C

Calculate required Performance data
Performance data results
L/min
L/hr
Max Thermostat Setting (°C)82
Min Thermostat Setting (°C)60
Water Connection ("/mm)50 mm H + C
Approx Weight Empty (kg)220
Gas Connection ("/mm)40 mm
Electrical Connection:240V / 50Hz
Max Water Supply Pressure (kPa)1000
Min Water Supply Pressure (kPa)140
Min Circuit Size (Amps)10
Return Water Connection ("/mm)25 mm

The water heater(s) shall be Rheem Commpak model no. CPI04 with a thermal input of 820 MJ/hr. The continuous flow water heater(s) shall conform to Australian Standard 4552 and be WaterMark certified. The water heaters shall be factory assembled and tested. The system shall be supplied with circulating pump and controller with BMS/BAS capability. Cold water and hot water manifolds shall be factory insulated. Each water heater shall be individually flued to the outside using the certified Rheem coaxial flue system incorporating a stainless steel inner and aluminised steel outer.